How to reset your HP LaserJet P2015 to Factory Default Settings

19 March 201525 September 2021 1 min read

Table of Contents

Last updated on September 25th, 2021 at 09:09 pm

Read Time:31 Second

If you have a HP LaserJet P2015 printer and you need to reset it to factory settings, maybe to remove the statically set IP address for example, you should carry out the following steps.

Step by Step Guide

First, you need to turn the printer off

Hold down on the Go button (the green button) on the control panel on the printer for around five seconds
Release the Go button and your HP Laserjet P2015 will now revert back at the factory default settings

Comments

Should you have any questions about this guide, please feel free to leave a comment below using our comments system.

Click to rate this post!

[Total: 0 Average: 0]

About Post Author

Andrew Armstrong

Founder of TechyGeeksHome and Head Editor for over 15 years! IT expert in multiple areas for over 23 years. Sharing experience and knowledge whenever possible! Making IT Happen.

techygeeks@outlook.com

https://blog.techygeekshome.info

administrator

11,434

8 thoughts on “How to reset your HP LaserJet P2015 to Factory Default Settings”

Ádám Barta says:

18 December 2019 at 07:16

Hello.
I tried resetting it but I couldn’t.

Reply
1. Siphesihle says:
  
  15 September 2020 at 09:38
  
  I could not me too and I’m tired of trying
  
  Reply
Anonymous says:

19 June 2018 at 15:19

idk

Reply
Anonymous says:

27 January 2017 at 16:00

Visitor Rating: 2 Stars

Reply
Anonymous says:

5 January 2017 at 10:45

Visitor Rating: 1 Stars

Reply
Andrew Armstrong says:

31 December 2016 at 23:23

Visitor Rating: 5 Stars

Reply
Anonymous says:

2 December 2016 at 12:26

Visitor Rating: 1 Stars

Reply
Vannessa Gonzalez says:

5 May 2016 at 19:08

Hello. Can you install the Formatter Board of a P2015dn printer to a P2015d series? The dn series has the Internet port but the d series doesn’t. I would like to know if these boards are interchangeable. Thank you

Reply