VMWare ESXi 5.5 – Adding RealTek and Atheros Network Card Drivers – Version 2.0

This is a re-post of an old post from just over a year ago, however some of the links have been updated and the versions updated so you should now use this post if you are having any trouble with the old one.

We have been trying to setup a new virtual host using VMWare ESXi 5.5.0 Update 1 with a Atheros AR8161 network card. As this is one of the unsupported network cards, it kept failing upon the boot up setup process – as expected of course.

As most of you will know, you can “inject” network card drivers into the ISO installation media for VMWare ESXi so we thought that this would be a good place to start to try and get this working. This turned out to be a much harder task than we thought but after 14 hours of messing about and about 20 CDR’s later, we got it working.

QUICK NOTE

Although this guide and our own testing process is based on the Atheros AR8161, this should work for most other network cards and we will add further below in this guide links to four different VIB files for Atheros and RealTek network card drivers that you can use without having to go through the pain we had to go through to find them!

INSTRUCTIONS

First of all, you should identify your network card driver. In our case it is a Quakcinn Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30). You then need to acquire the VIB file for this network card driver to enable you to “inject” it into the ISO installation media. We will provide the ones that we can for you to download, but if your network card is not one of the ones in the package below then you need to spend a bit of time Googling to find your own network card VIB file.

We would like to ask that if you have others that you would like to share with the community, please contact us so that we can add a list of VIB files to this page for others to use or just post a link in the comments section to the VIB download

DOWNLOAD

The download is now available from our Downloads microsite by clicking the button below, just browse through the Downloads section on the microsite to find the file.

The VIB files included in this current download package are:

• Atheros AR8161 VIB Driver
• Atheros AR8151 VIB Driver
• Realtek R8168 VIB Driver
• Realtek R8169 VIB Driver

When you are happy that you have the correct VIB file for your network card driver, then you need the following things to continue:

• ESXi Customizer Tool
• VMWare ESXi 5.5.0 Update 1 ISO Installation Media
• Network Card VIB Files