SCCM – Create Stand Alone Media using larger capacity memory sticks

sccm logo 600x400

Last updated on March 30th, 2023 at 07:09 pm

Read Time:1 Minute, 54 Second

If you need to create standalone media for any of your task sequences within SCCM, you may find that you have to use a large capacity memory stick.

I have found that when I’ve tried to use a 64GB memory stick or above, the Create Stand Alone Media process always fails. So to get round this, there are two ways; do not use memory sticks larger than 32GB or using diskpart, create primary partition of 32GB.

Instructions

Run CMD as an administrator on a machine with the Configuration Manager Console installed:

SCCM - Create Stand Alone Media using larger capacity memory sticks 1

Then type diskpart to enter the DiskPart utility:

SCCM - Create Stand Alone Media using larger capacity memory sticks 2

Then type in list disk to list all of your available disks:

SCCM - Create Stand Alone Media using larger capacity memory sticks 3

As you can see from the above screenshot, my 64GB (although it says 57GB..) USB stick is disk 7. Once you have identified your USB stick, type in select disk # (# = the disk number, in this case 7):

SCCM - Create Stand Alone Media using larger capacity memory sticks 4

Then you want to completely clean this disk, so type in clean (please note that this will completely wipe your memory stick so make sure you want to do this before this step!):

SCCM - Create Stand Alone Media using larger capacity memory sticks 5

You then need to create a primary partition on the disk so type in create partition primary:

SCCM - Create Stand Alone Media using larger capacity memory sticks 6

Then you need to select the new partition that you have just created, so type in select partition 1

SCCM - Create Stand Alone Media using larger capacity memory sticks 7

This partition then needs to be made active so type in active:

SCCM - Create Stand Alone Media using larger capacity memory sticks 8

Now that the disk is clean, re-partitioned and active, you need to shrink it down to below the 32GB size that the Configuration Manager Console is happy with. To do this, type in shrink desired=32768 (you can change this slightly depending on your requirements but should be total size below 32GB)

SCCM - Create Stand Alone Media using larger capacity memory sticks 9

You now need to format the new, below 32GB partition, so type in format fs=ntfs quick (if you do not type in the command quick, it will take a long time to complete this process):

SCCM - Create Stand Alone Media using larger capacity memory sticks 10

Then you need to assign a drive letter to this partition, so type in assign:

SCCM - Create Stand Alone Media using larger capacity memory sticks 11

You can then exit the DiskPart program by typing in the exit command.

This will now give you a memory stick with around a 32GB partition ready to have the stand alone media process run on it, you should now find that it will complete successfully.

Click to rate this post!
[Total: 1 Average: 5]

Free Subscription

If you want to be notified when we post more quality guides like this one, sign up to our free subscription service and you will receive an email when a new post is live.

Join 441 other subscribers.

No need to worry, we will not be filling your inbox with spam and you can unsubscribe anytime you like.


Leave us a message...

This site uses Akismet to reduce spam. Learn how your comment data is processed.