Create Bootable Windows 7 & 8 USB Installers

()

To create a bootable USB stick to install either Windows 7 or Windows 8 follow the instructions below:

Plug in a USB stick up to 16GB, no smaller than 4GB and no bigger than 16GB or it will not work.

Open a command prompt on a Windows 7 or Windows 8 computer.

Type diskpart and press enter.

Once in disk part, you should run the following commands in order:

  • list disk (you should then identify the disk you want to use)
  • select disk # (# being the disk number identified in the step above)
  • clean
  • create partition primary
  • format fs=fat32 quick (note the fat32 filesystem, this is because UEFI does not recognise NTFS) – also remember the “quick” part or else it will take hours to complete the format
  • active
  • assign
  • exit

The USB stick is then ready to copy the OS files to it. You should copy these files directly from your OS media to the USB stick.

Once complete, insert the USB stick into a machine and boot from it and it should then start to install the OS.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

About A.J. Armstrong

Founder of TechyGeeksHome and Head Editor for over eight years! IT expert in multiple areas for over 21 years. Sharing experience and knowledge whenever possible! Making IT Happen.

View all posts by A.J. Armstrong

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.